Hiding your electrical cords in the middle of your gaming room can sometimes be tough and unyielding. After all, the fact that you have your gaming desk in the middle of the room naturally attracts some complications.
However, that doesn't mean concealing the cords in such a setup is not possible. So if you're ready and willing to learn new and professional ways to do the hiding, this article is specially made for you.
So as the tip of the iceberg, if you have your desk located in the center of the room, you need to install floor electrical outlets. But if that's not realistic with your setup, no worries. Here are other options you can use.
How to Hide Electrical Cords in the Center of Your Gaming Room Easily
It doesn't matter where, in the room, your desk is located because you'll always find the need to work your cables around. This is is to make the usability of the computer and other accessories, maybe the printer, easier.
Even at that, things might go sideways if your only way is to leave the table in the center of the gaming room without the technical know-how of concealing the cables.
Many gamers and office workers often stretch their cords across the floor but that's very dangerous and unpleasant. And if care is not taken, it can become a pitfall that can easily trip you over.
However, you can perform wonders with your cable management. All you need is a touch of creativity. Read between the lines as we walk through these tips on hiding cords without much complications.
Buy Floor Electrical Outlets
Have you considered fixing floor electrical outlets in your gaming space? Yeah, it has a load of perks that should work perfectly with your setup.
It's a bit economical and the best way to keep your electrical cords safe and organized in a single place without causing accidents. Except your co-workers are quite observant, they'll hardly know that you have cords plugged on the floor. That's big thanks to the subtle construction of the electrical outlets.
Conceal the Cords in the Walls
Here's another fundamental tip we'll advise that you try out. This demands that you conceal the cords on the wall. So all you need to create magic here is a tape that has the same color as the wall or wall paint. After taping the cords and cables on the wall, you can also place anything in front of them to reduce their visibility to anyone that enters the room.
And if you want to go creative, getting an attractive wall decor or a flower arrangement will do a perfect job in complementing the other parts of the gaming room or workstation.
Work the Cords Along the Floor
Do you know that you can run those cables along the floor? For example, working them together with the baseboards will give a fantastic result. First, it won't make the cords too noticeable. However, you need to ensure that the cords are tight so that people won't trip over them while walking around.
If possible, you should also check out the ones with hardwood flooring. Why this suggestion? This will help you capitalize on the space between the subfloor and flooring. However, the only extra effort that might be demanded is drilling holes - just two holes. You drill one in the desk area and the other on the electrical outlet you want to use.
And to simultaneously plug different devices at a time, you can work out an extension cord in the room.
Go for Cord Tapes
Cord tapes are available in different sizes and colors. And as the name suggests, they are built specially to hide the cables that you have laid along your wall or the floor of the gaming room.
It's very easy and friendly to use. Even to remove, the cords have no complications. Now, you remember we earlier said cord tapes are available in various degrees? Yes, so you should ensure that you use tape for floors for your floor and tape for carpets for your carpets.
Flowing from above, if you want to overcome this challenge of sloppy electrical cords as soon as possible, here's one of the simplest ways you shouldn't overlook. And in addition, cord tapes are very affordable.
Photo Source: Amazon
Use Hollow Books
This is where you invoke your creativity and put it to work. This tip is a DIY solution and you have to hide your cords and other bulky electronics in hollow books. All you have to do is get some books that you're no longer using. These books should have hardback covers and be big enough to accommodate the width of the electronics.
Having fulfilled those requirements, you should also get a pair of scissors (sharp) or a craft knife and a glue gun ready.
Are these tools ready? You can follow the steps below.
Step 1: Cut the Books
Before you even cut, you should decide which of the available books will serve as the cable cover. Anyway, we suggest that you set both the front and back aside for a decorous look. Now, you can use your knife to remove all the pages of the books.
Step 2: Combine all the Books
Gently fix each side of the two book joints together using the glue gun and make sure that the attached spots have completely dried up. Once you've done that, tada! There's a special and separate box that you can use to meet your router and other electronics. Easy peasy!
Use Furniture
Here, you'll need to get some cord slips. However, before leaving the store, you need to make sure that the cord slips work with the material of your furniture. You know that some of these products are attachable to glass, wood, and plastic, among others.
Now, you have to remove the adhesive area on the clips and fasten them to your chair. Finally, adjust the cables on the clips so that the sofa power cords will be well-hidden.
Photo Source: Amazon
Cord Covers
This method of hiding electrical cords works perfectly for concrete walls and hardwood floors. These covers are built to conceal wires in the living room, bedroom, gaming room, and casino, among others, so you can trust the cord covers to work effectively and efficiently.
All you have to do is peel off the adhesive backing and fix the covers wherever you want them. Meanwhile, you should also check out the length and thickness of the product to know if it is suitable for your wire.
In some instances, the makers may use anchors and screws on their cord covers instead of adhesive. Hence, you have to place the cover on the wall or floor together with the attached hardware.
Work the Cords Along Your Table's Legs
Here is another hotshot method to conceal your electrical cords by working them along the legs of your table. Depending on your choice, you can use a single cord clip or any other cord management gear. The first step is to fix two pieces of cord clips each to the leg, side, and base of the table. And if you feel like the clips are not strong enough to hold the cords intact, you can attach more.
After this, you can fix the wire to the clips you've earlier attached to conceal the cables well. And that's it! You can now enjoy a tangle-free cord and people will even barely notice it. On the other side of it, you can waive the clips and go for wrapping instead. All you have to do is wrap the cords around the vases, legs, and other parts of the table.
Other Available Substitutes to Use
You have lots of options to explore when the talk gets to cable management. For example, you can go for a height-adjustable standing desk and you can check more info online about arrangements for standing desk cable management.
You can also use a cord organizer to put all the cables around the desk in place and the same direction. For instance, an L-shaped concept will give your standing desk deeper organization and the gaming room would look more artistically likable.
Conclusion
Concealing electrical cords doesn't have to be daunting in as much as you're creative. Creativity is the key to perfect cable management without spending beyond your budget. Hence, we assure you that the above-mentioned tips are the best and most economical ways to hide electrical cables in a gaming room with the desk positioned in the center of the room.
